Mobotix T24 Informations techniques télécharger pdf (Page 69)

69/118

Manage Access PINs

www.mobotix.com • [email protected]

4. Enter Access Conﬁguration Mode: Brieﬂy press the blue key button, which then

lights up blue.

5. Enter Add Mode: Press the OK/MENU button until you hear the second beep

(button lights up blue).

6. Assign access PIN: Enter the personal number of the user to whom you wish to

assign the access PIN and press the OK/MENU button. Otherwise, you can skip

this step and continue with step 7.

7. Enter PIN: Enter the access PIN on the keypad and press the blue key button (which

then displays a blue ﬂashing pattern). Re-enter the access PIN for conﬁrmation and

press the blue key button. A beep sounds and the keypad displays a ﬂashing ring

pattern.

8. Setup of the new access PIN is complete. You are now back in conﬁguration mode

(the OK/MENU button lights up blue). Press the ESC/ALARM button to exit. After

60 seconds, the mode is exited automatically.

Note

In case of a wrong entry, cancellation of entry via the ESC/ALARM button, or a delay

of more than 60 seconds, a low warning tone is sounded and the system reverts to

the regular operating mode (all buttons light up white). If required, re-enter into Add

mode as described above.

hold (2nd beep)

0 9

Person No.

0 9

Access PIN

0 9

Access PIN

ESC

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 119 120

Pas de commentaire

Mobotix T24 Informations techniques Page 69