Mobotix T24 Informations techniques télécharger pdf (Page 74)

74/118

T24 System Manual Part 2: Access Conﬁguration On The Keypad

www.mobotix.com • [email protected]

3.5 Erase All Access Privileges Of A User (Cards/PINs)

By using the red admin card and the keypad, you can erase all the access media set up

for a speciﬁc user at once, i.e., all blue user cards and access PINs assigned to the same

personal number. The invalidated user cards can be set up again from scratch at any time.

To invalidate all user cards and PINs sharing the same personal number, you need the

red admin card.

Proceed As Follows:

1. Procure the personal number of the user for whom keyless access is to be removed.

2. Enter Conﬁguration Mode: Press the OK/MENU button until you hear the second

beep (button ﬂashes blue).

3. Hold your admin card up to the keypad buttons until you hear a beep and the

OK/MENU button lights up blue continuously.

4. Enter Access Conﬁguration Mode: Brieﬂy press the blue key button, which then

lights up blue.

5. Enter Erase Mode: Press the ESC/ALARM button until you hear the second beep

(button lights up blue).

hold (2nd beep)

ESC

hold (2nd beep)

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 119 120

Pas de commentaire

Mobotix T24 Informations techniques Page 74