Mobotix T24 Informations techniques télécharger pdf (Page 63)

63/118

Managing Transponders

www.mobotix.com • [email protected]

To Set Up A Time-Restricted User Card, You Need The Red Admin Card. Proceed As

Follows:

1. Press the blue key button until you hear the second beep (button ﬂashes blue).

2. Hold your admin card up to the keypad buttons until you hear a beep and the

blue key button lights up blue continuously.

3. Set the validity period (1–48 hours): Enter the desired validity period in hours via

the keypad: (min. 1, max. 48).

4. Present time-restricted user card: Hold the user card up to the keypad buttons

until a beep sounds and the keypad shows a ﬂashing ring pattern.

The system then returns to regular operating mode and setup of the time-restricted

card is complete. The entered time span commences immediately; the card can

be used for keyless access until the end of the validity period.

Note

In case of a wrong entry, cancellation of entry via the ESC/ALARM button, or a delay of

more than 60 seconds, a low warning tone is sounded and the system immediately

reverts to the regular operating mode (all buttons light up white).

hold (2nd beep)

0 9

Access Time (h)

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 119 120

Pas de commentaire

Mobotix T24 Informations techniques Page 63