Mobotix T24 Manuel d'utilisateur télécharger pdf (Page 9)

Epygi Technologies Configuring Quadro with Mobotix T24/T25 IP Video Door Station Device

PAGE 9 18-Feb-14

3.2 Mobotix T24/T25 IP Video Door Station Device Configuration

as IP Line of Quadro IP PBX

To configure Mobotix IP Video Door Station device to function with the Quadro, follow the steps

below:

 Connect the device to the LAN interface of Quadro IP PBX.

 Log in to Mobotix IP Video Door Station device by entering the IP address in a browser

(default user name “admin”, default password “meinsm”) and factory reset the device.

By default, DHCP is enabled on the unit so it will receive an IP address from the Quadro DHCP

server.

Run the MxEasy setup file. The main window for MxEasy will open.

1. Go to the Camera->Camera Options menu and select the VoIP tab (see Figure 4).

Figure 4

 Press the button to add a new account.

Configure the new account as follows:

 Set the SIP user name field to the Username entered in “IP Line Settings” page of

Quadro IP PBX.

 Set the SIP password field to the Password entered in “IP Line Settings” page of

Quadro IP PBX.

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

Mobotix T24 Manuel d'utilisateur Page 9