Mobotix T24 Manuel d'utilisateur télécharger pdf (Page 5)

Epygi Technologies Configuring Quadro with Mobotix T24/T25 IP Video Door Station Device

PAGE 5 18-Feb-14

 User enters the preconfigured PIN code and speaks to visitor who is at the entrance.

 The live image of the door camera is displayed in the color display for the IP video phone.

 User can then press the appropriate digit on the IP video phone dial pad to activate the

electric door opener (see Figure 8).

Attention: When a visitor rings the doorbell and no one answers, voicemail is activated on the

Quadro, and visitors can leave a voice message in the voice mailbox for an extension on the

Quadro. Users on the Quadro can listen to these voice messages from the video phone.

Additionally, all voice messages can be sent as attachments via email to the predefined

recipients as .wav files.

3.1 Configuring the Quadro IP PBX

The steps below describe the basic configuration on the Quadro IP PBX for desired scenario.

Refer to the Quadro Administrator’s Guide for advanced configuration.

3.1.1 Configuring Mobotix T24/T25 IP Video Door Station Device as an IP

Line on the Quadro IP PBX

To configure the Mobotix IP Video Door Station as an IP line on the Quadro, login to the

Quadro Web Management from your PC by entering the IP address in a browser (user name

“admin”, default password “19”):

1. In the Quadro management main menu access the Telephony->Line Settings->IP

Line Settings page to configure the IP Line that will be used for Mobotix.

2. From the Attached Extension column, choose an extension to be assigned to the

Mobotix (extension 134 in this example) and click on the corresponding IP line link (see

Figure 1).

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

Mobotix T24 Manuel d'utilisateur Page 5